Installation / Setup Tips
|The redundant power supply unit (PSU) in QuantaMesh Switch.|
When both supplies are active, the dual supplies will share the load at approximately 50% each. When either power supply fails or has lost input power, the remaining supply draws and provides 100% of the load. Please read the "Components Replacement" section in the Switch Installation Guide if maintenance or replacement of PSU is required.
|QuantaMesh T3048-LY8 QuantaMesh T3048-LY9 QuantaMesh BMS T5032-LY6 QuantaMesh BMS T3048-LY9 QuantaMesh BMS T3048-LY8 QuantaMesh BMS T3048-LY2R|